Andrej Cimperšek - diploma

<?xml version="1.0" encoding="UTF-8"?>

<!-- You may freely edit this file. See commented blocks below for -->

<!-- some examples of how to customize the build. -->

<!-- (If you delete it and reopen the project it will be recreated.) -->

<!-- By default, only the Clean and Build commands use this build script. -->

<!-- Commands such as Run, Debug, and Test only use this build script if -->

<!-- the Compile on Save feature is turned off for the project. -->

<!-- You can turn off the Compile on Save (or Deploy on Save) setting -->

<!-- in the project's Project Properties dialog box.-->

<project name="LIDAR_SOAP" default="default" basedir=".">

    <description>Builds, tests, and runs the project LIDAR SOAP.</description>

    <import file="nbproject/build-impl.xml"/>

    <!--

    There exist several targets which are by default empty and which can be 

    used for execution of your tasks. These targets are usually executed 

    before and after some main targets. They are: 

      -pre-init:                 called before initialization of project properties 

      -post-init:                called after initialization of project properties 

      -pre-compile:              called before javac compilation 

      -post-compile:             called after javac compilation 

      -pre-compile-single:       called before javac compilation of single file

      -post-compile-single:      called after javac compilation of single file

      -pre-compile-test:         called before javac compilation of JUnit tests

      -post-compile-test:        called after javac compilation of JUnit tests

      -pre-compile-test-single:  called before javac compilation of single JUnit test

      -post-compile-test-single: called after javac compilation of single JUunit test

      -pre-dist:                 called before archive building 

      -post-dist:                called after archive building 

      -post-clean:               called after cleaning build products 

      -pre-run-deploy:           called before deploying

      -post-run-deploy:          called after deploying

    Example of pluging an obfuscator after the compilation could look like 

        <target name="-post-compile">

            <obfuscate>

                <fileset dir="${build.classes.dir}"/>

            </obfuscate>

        </target>

    For list of available properties check the imported 

    nbproject/build-impl.xml file. 

    Other way how to customize the build is by overriding existing main targets.

    The target of interest are: 

      init-macrodef-javac:    defines macro for javac compilation

      init-macrodef-junit:   defines macro for junit execution

      init-macrodef-debug:    defines macro for class debugging

      do-dist:                archive building

      run:                    execution of project 

      javadoc-build:          javadoc generation 

    Example of overriding the target for project execution could look like 

        <target name="run" depends="<PROJNAME>-impl.jar">

            <exec dir="bin" executable="launcher.exe">

                <arg file="${dist.jar}"/>

            </exec>

        </target>

    Notice that overridden target depends on jar target and not only on 

    compile target as regular run target does. Again, for list of available 

    properties which you can use check the target you are overriding in 

    nbproject/build-impl.xml file. 

    -->

</project>

annotation.processing.enabled=true

annotation.processing.enabled.in.editor=true

annotation.processing.processors.list=

annotation.processing.run.all.processors=true

annotation.processing.source.output=${build.generated.sources.dir}/ap-source-output

build.classes.dir=${build.web.dir}/WEB-INF/classes

build.classes.excludes=**/*.java,**/*.form

build.dir=build

build.generated.dir=${build.dir}/generated

build.generated.sources.dir=${build.dir}/generated-sources

build.test.classes.dir=${build.dir}/test/classes

build.test.results.dir=${build.dir}/test/results

build.web.dir=${build.dir}/web

build.web.excludes=${build.classes.excludes}

client.urlPart=

compile.jsps=false

conf.dir=${source.root}/conf

debug.classpath=${build.classes.dir}:${javac.classpath}

debug.test.classpath=\

    ${run.test.classpath}

display.browser=true

dist.dir=dist

dist.ear.war=${dist.dir}/${war.ear.name}

dist.javadoc.dir=${dist.dir}/javadoc

dist.war=${dist.dir}/${war.name}

endorsed.classpath=

excludes=

file.reference.commons-collections-3.2.1.jar=/home/cime/Documents/commons-collections-3.2.1/commons-collections-3.2.1.jar

file.reference.commons-configuration-1.6.jar=/home/cime/Documents/commons-configuration-1.6/commons-configuration-1.6.jar

file.reference.commons-lang-2.5.jar=/home/cime/Documents/commons-lang-2.5/commons-lang-2.5.jar

file.reference.gson-1.3.jar=lib/gson-1.3.jar

file.reference.gson-1.3.jar-1=/home/cime/Documents/gson-1.3.jar

file.reference.JPam-1.1.jar=/home/cime/Documents/JPam-1.1/JPam-1.1.jar

file.reference.mysql-connector-java-5.1.6-bin.jar=/home/cime/netbeans-6.9/ide/modules/ext/mysql-connector-java-5.1.6-bin.jar

includes=**

j2ee.deploy.on.save=true

j2ee.platform=1.5

j2ee.platform.classpath=${j2ee.server.home}/lib/jasper-el.jar:${j2ee.server.home}/lib/catalina-ha.jar:${j2ee.server.home}/lib/el-api.jar:${j2ee.server.home}/lib/tomcat-coyote.jar:${j2ee.server.home}/lib/jasper.jar:${j2ee.server.home}/lib/tomcat-dbcp.jar:${j2ee.server.home}/lib/tomcat-i18n-fr.jar:${j2ee.server.home}/lib/catalina.jar:${j2ee.server.home}/lib/catalina-ant.jar:${j2ee.server.home}/lib/tomcat-i18n-es.jar:${j2ee.server.home}/lib/catalina-tribes.jar:${j2ee.server.home}/lib/tomcat-i18n-ja.jar:${j2ee.server.home}/lib/jsp-api.jar:${j2ee.server.home}/lib/annotations-api.jar:${j2ee.server.home}/lib/servlet-api.jar:${j2ee.server.home}/bin/tomcat-juli.jar

j2ee.server.type=Tomcat60

jar.compress=false

javac.classpath=\

    ${libs.hibernate-support.classpath}:\

    ${libs.ejb3-persistence.classpath}:\

    ${file.reference.mysql-connector-java-5.1.6-bin.jar}:\

    ${libs.metro.classpath}:\

    ${file.reference.gson-1.3.jar}:\

    ${libs.JavaComm.classpath}:\

    ${file.reference.JPam-1.1.jar}:\

    ${file.reference.commons-configuration-1.6.jar}:\

    ${file.reference.commons-lang-2.5.jar}:\

    ${file.reference.commons-collections-3.2.1.jar}:\

    ${file.reference.gson-1.3.jar-1}

# Space-separated list of extra javac options

javac.compilerargs=

javac.debug=true

javac.deprecation=false

javac.processorpath=\

    ${javac.classpath}

javac.source=1.5

javac.target=1.5

javac.test.classpath=\

    ${javac.classpath}:\

    ${build.classes.dir}:\

    ${libs.junit.classpath}:\

    ${libs.junit_4.classpath}

javac.test.processorpath=\

    ${javac.test.classpath}

javadoc.additionalparam=

javadoc.author=false

javadoc.encoding=${source.encoding}

javadoc.noindex=false

javadoc.nonavbar=false

javadoc.notree=false

javadoc.preview=true

javadoc.private=false

javadoc.splitindex=true

javadoc.use=true

javadoc.version=false

javadoc.windowtitle=

lib.dir=${web.docbase.dir}/WEB-INF/lib

persistence.xml.dir=${conf.dir}

platform.active=default_platform

resource.dir=setup

run.test.classpath=\

    ${javac.test.classpath}:\

    ${build.test.classes.dir}

# Space-separated list of JVM arguments used when running a class with a main method or a unit test

# (you may also define separate properties like run-sys-prop.name=value instead of -Dname=value):

runmain.jvmargs=

source.encoding=UTF-8

source.root=src

src.dir=${source.root}/java

test.src.dir=test

war.content.additional=

war.ear.name=LIDAR_SOAP.war

war.name=LIDAR_SOAP.war

web.docbase.dir=web

webinf.dir=web/WEB-INF

<?xml version="1.0" encoding="UTF-8"?>

<project xmlns="http://www.netbeans.org/ns/project/1">

    <type>org.netbeans.modules.web.project</type>

    <configuration>

        <buildExtensions xmlns="http://www.netbeans.org/ns/ant-build-extender/1"/>

        <data xmlns="http://www.netbeans.org/ns/web-project/3">

            <name>LIDAR SOAP</name>

            <minimum-ant-version>1.6.5</minimum-ant-version>

            <web-module-libraries>

                <library dirs="200">

                    <file>${libs.hibernate-support.classpath}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${libs.ejb3-persistence.classpath}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${file.reference.mysql-connector-java-5.1.6-bin.jar}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${libs.metro.classpath}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${file.reference.gson-1.3.jar}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${libs.JavaComm.classpath}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${file.reference.JPam-1.1.jar}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${file.reference.commons-configuration-1.6.jar}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${file.reference.commons-lang-2.5.jar}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${file.reference.commons-collections-3.2.1.jar}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

                <library dirs="200">

                    <file>${file.reference.gson-1.3.jar-1}</file>

                    <path-in-war>WEB-INF/lib</path-in-war>

                </library>

            </web-module-libraries>

            <web-module-additional-libraries/>

            <source-roots>

                <root id="src.dir"/>

            </source-roots>

            <test-roots>

                <root id="test.src.dir"/>

            </test-roots>

        </data>

    </configuration>

</project>

build.xml.data.CRC32=8d3b9fa6

build.xml.script.CRC32=6ef1775d

build.xml.stylesheet.CRC32=651128d4@1.24.1.1

# This file is used by a NetBeans-based IDE to track changes in generated files such as build-impl.xml.

# Do not edit this file. You may delete it but then the IDE will never regenerate such files for you.

nbproject/build-impl.xml.data.CRC32=8d3b9fa6

nbproject/build-impl.xml.script.CRC32=6370b77c

nbproject/build-impl.xml.stylesheet.CRC32=8335d67d@1.24.1.1

nbproject/jaxws-build.xml.stylesheet.CRC32=b0a0073f

<?xml version="1.0" encoding="UTF-8"?>

<jax-ws xmlns="http://www.netbeans.org/ns/jax-ws/1">

  <services>

  </services>

  <clients/>

  <jsr109>false</jsr109>

</jax-ws>

<?xml version="1.0" encoding="UTF-8"?>

<project default="-deploy-ant" basedir=".">

    <target name="-init" if="deploy.ant.enabled">

        <property file="${deploy.ant.properties.file}"/>

        <tempfile property="temp.module.folder" prefix="tomcat" destdir="${java.io.tmpdir}"/>

        <unwar src="${deploy.ant.archive}" dest="${temp.module.folder}">

            <patternset includes="META-INF/context.xml"/>

        </unwar>

        <xmlproperty file="${temp.module.folder}/META-INF/context.xml"/>

        <delete dir="${temp.module.folder}"/>

    </target>

    <target name="-deploy-ant" if="deploy.ant.enabled" depends="-init">

        <echo message="Deploying ${deploy.ant.archive} to ${Context(path)}"/>

        <taskdef name="deploy" classname="org.apache.catalina.ant.DeployTask"

                 classpath="${tomcat.home}/lib/catalina-ant.jar"/>

        <deploy url="${tomcat.url}/manager" username="${tomcat.username}"

                password="${tomcat.password}" path="${Context(path)}"

                war="${deploy.ant.archive}"/>

        <property name="deploy.ant.client.url" value="${tomcat.url}${Context(path)}"/>

    </target>

    <target name="-undeploy-ant" if="deploy.ant.enabled" depends="-init">

        <echo message="Undeploying ${Context(path)}"/>

        <taskdef name="undeploy"  classname="org.apache.catalina.ant.UndeployTask"

                classpath="${tomcat.home}/lib/catalina-ant.jar"/>

        <undeploy url="${tomcat.url}/manager" username="${tomcat.username}" 

                  password="${tomcat.password}" path="${Context(path)}"/>

    </target>

</project>

<?xml version="1.0" encoding="UTF-8"?>

<!--

        *** GENERATED FROM project.xml - DO NOT EDIT  ***

        ***         EDIT ../build.xml INSTEAD         ***

        For the purpose of easier reading the script

        is divided into following sections:

        - initialization

        - compilation

        - dist

        - execution

        - debugging

        - javadoc

        - junit compilation

        - junit execution

        - junit debugging

        - cleanup

        -->

<project xmlns:webproject1="http://www.netbeans.org/ns/web-project/1" xmlns:webproject2="http://www.netbeans.org/ns/web-project/2" xmlns:webproject3="http://www.netbeans.org/ns/web-project/3" basedir=".." default="default" name="LIDAR_SOAP-impl">

    <import file="ant-deploy.xml"/>

    <fail message="Please build using Ant 1.7.1 or higher.">

        <condition>

            <not>

                <antversion atleast="1.7.1"/>

            </not>

        </condition>

    </fail>

    <target depends="dist,javadoc" description="Build whole project." name="default"/>

    <!--

                INITIALIZATION SECTION

            -->

    <target name="-pre-init">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="-pre-init" name="-init-private">

        <property file="nbproject/private/private.properties"/>

    </target>

    <target depends="-pre-init,-init-private" name="-init-user">

        <property file="${user.properties.file}"/>

        <!-- The two properties below are usually overridden -->

        <!-- by the active platform. Just a fallback. -->

        <property name="default.javac.source" value="1.4"/>

        <property name="default.javac.target" value="1.4"/>

    </target>

    <target depends="-pre-init,-init-private,-init-user" name="-init-project">

        <property file="nbproject/project.properties"/>

    </target>

    <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" if="dist.ear.dir" name="-do-ear-init"/>

    <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init">

        <condition property="have.tests">

            <or>

                <available file="${test.src.dir}"/>

            </or>

        </condition>

        <condition property="have.sources">

            <or>

                <available file="${src.dir}"/>

            </or>

        </condition>

        <condition property="netbeans.home+have.tests">

            <and>

                <isset property="netbeans.home"/>

                <isset property="have.tests"/>

            </and>

        </condition>

        <condition property="no.javadoc.preview">

            <isfalse value="${javadoc.preview}"/>

        </condition>

        <property name="javac.compilerargs" value=""/>

        <condition property="no.deps">

            <and>

                <istrue value="${no.dependencies}"/>

            </and>

        </condition>

        <condition property="no.dist.ear.dir">

            <not>

                <isset property="dist.ear.dir"/>

            </not>

        </condition>

        <property name="build.web.excludes" value="${build.classes.excludes}"/>

        <condition property="do.compile.jsps">

            <istrue value="${compile.jsps}"/>

        </condition>

        <condition property="do.debug.server">

            <or>

                <not>

                    <isset property="debug.server"/>

                </not>

                <istrue value="${debug.server}"/>

                <and>

                    <not>

                        <istrue value="${debug.server}"/>

                    </not>

                    <not>

                        <istrue value="${debug.client}"/>

                    </not>

                </and>

            </or>

        </condition>

        <condition property="do.debug.client">

            <istrue value="${debug.client}"/>

        </condition>

        <condition property="do.display.browser">

            <istrue value="${display.browser}"/>

        </condition>

        <condition property="do.display.browser.debug">

            <and>

                <isset property="do.display.browser"/>

                <not>

                    <isset property="do.debug.client"/>

                </not>

            </and>

        </condition>

        <available file="${conf.dir}/MANIFEST.MF" property="has.custom.manifest"/>

        <available file="${persistence.xml.dir}/persistence.xml" property="has.persistence.xml"/>

        <condition property="do.war.package.with.custom.manifest">

            <isset property="has.custom.manifest"/>

        </condition>

        <condition property="do.war.package.without.custom.manifest">

            <not>

                <isset property="has.custom.manifest"/>

            </not>

        </condition>

        <condition property="do.tmp.war.package.with.custom.manifest">

            <and>

                <isset property="has.custom.manifest"/>

                <or>

                    <isfalse value="${directory.deployment.supported}"/>

                    <isset property="dist.ear.dir"/>

                </or>

            </and>

        </condition>

        <condition property="do.tmp.war.package.without.custom.manifest">

            <and>

                <not>

                    <isset property="has.custom.manifest"/>

                </not>

                <or>

                    <isfalse value="${directory.deployment.supported}"/>

                    <isset property="dist.ear.dir"/>

                </or>

            </and>

        </condition>

        <condition property="do.tmp.war.package">

            <or>

                <isfalse value="${directory.deployment.supported}"/>

                <isset property="dist.ear.dir"/>

            </or>

        </condition>

        <property name="build.meta.inf.dir" value="${build.web.dir}/META-INF"/>

        <condition else="" property="application.args.param" value="${application.args}">

            <and>

                <isset property="application.args"/>

                <not>

                    <equals arg1="${application.args}" arg2="" trim="true"/>

                </not>

            </and>

        </condition>

        <property name="source.encoding" value="${file.encoding}"/>

        <condition property="javadoc.encoding.used" value="${javadoc.encoding}">

            <and>

                <isset property="javadoc.encoding"/>

                <not>

                    <equals arg1="${javadoc.encoding}" arg2=""/>

                </not>

            </and>

        </condition>

        <property name="javadoc.encoding.used" value="${source.encoding}"/>

        <property name="includes" value="**"/>

        <property name="excludes" value=""/>

        <property name="runmain.jvmargs" value=""/>

        <path id="endorsed.classpath.path" path="${endorsed.classpath}"/>

        <condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'">

            <length length="0" string="${endorsed.classpath}" when="greater"/>

        </condition>

    </target>

    <target depends="init" name="-init-cos" unless="deploy.on.save">

        <condition property="deploy.on.save" value="true">

            <istrue value="${j2ee.deploy.on.save}"/>

        </condition>

    </target>

    <target name="-post-init">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check">

        <fail unless="src.dir">Must set src.dir</fail>

        <fail unless="test.src.dir">Must set test.src.dir</fail>

        <fail unless="build.dir">Must set build.dir</fail>

        <fail unless="build.web.dir">Must set build.web.dir</fail>

        <fail unless="build.generated.dir">Must set build.generated.dir</fail>

        <fail unless="dist.dir">Must set dist.dir</fail>

        <fail unless="build.classes.dir">Must set build.classes.dir</fail>

        <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>

        <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail>

        <fail unless="build.test.results.dir">Must set build.test.results.dir</fail>

        <fail unless="build.classes.excludes">Must set build.classes.excludes</fail>

        <fail unless="dist.war">Must set dist.war</fail>

        <condition property="missing.j2ee.server.home">

            <and>

                <matches pattern="j2ee.server.home" string="${j2ee.platform.classpath}"/>

                <not>

                    <isset property="j2ee.server.home"/>

                </not>

            </and>

        </condition>

        <fail if="missing.j2ee.server.home">

The Java EE server classpath is not correctly set up - server home directory is missing.

Either open the project in the IDE and assign the server or setup the server classpath manually.

For example like this:

   ant -Dj2ee.server.home=<app_server_installation_directory>

                </fail>

        <fail unless="j2ee.platform.classpath">

The Java EE server classpath is not correctly set up. Your active server type is ${j2ee.server.type}.

Either open the project in the IDE and assign the server or setup the server classpath manually.

For example like this:

   ant -Duser.properties.file=<path_to_property_file> (where you put the property "j2ee.platform.classpath" in a .properties file)

or ant -Dj2ee.platform.classpath=<server_classpath> (where no properties file is used)

                </fail>

    </target>

    <target name="-init-macrodef-property">

        <macrodef name="property" uri="http://www.netbeans.org/ns/web-project/1">

            <attribute name="name"/>

            <attribute name="value"/>

            <sequential>

                <property name="@{name}" value="${@{value}}"/>

            </sequential>

        </macrodef>

    </target>

    <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-macrodef-javac-with-processors">

        <macrodef name="javac" uri="http://www.netbeans.org/ns/web-project/2">

            <attribute default="${src.dir}" name="srcdir"/>

            <attribute default="${build.classes.dir}" name="destdir"/>

            <attribute default="${javac.classpath}:${j2ee.platform.classpath}" name="classpath"/>

            <attribute default="${javac.processorpath}" name="processorpath"/>

            <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/>

            <attribute default="${includes}" name="includes"/>

            <attribute default="${excludes}" name="excludes"/>

            <attribute default="${javac.debug}" name="debug"/>

            <attribute default="${empty.dir}" name="gensrcdir"/>

            <element name="customize" optional="true"/>

            <sequential>

                <property location="${build.dir}/empty" name="empty.dir"/>

                <mkdir dir="${empty.dir}"/>

                <mkdir dir="@{apgeneratedsrcdir}"/>

                <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" includeantruntime="false" includes="@{includes}" source="${javac.source}" srcdir="@{srcdir}" target="${javac.target}">

                    <src>

                        <dirset dir="@{gensrcdir}" erroronmissingdir="false">

                            <include name="*"/>

                        </dirset>

                    </src>

                    <classpath>

                        <path path="@{classpath}"/>

                    </classpath>

                    <compilerarg line="${endorsed.classpath.cmd.line.arg}"/>

                    <compilerarg line="${javac.compilerargs}"/>

                    <compilerarg value="-processorpath"/>

                    <compilerarg path="@{processorpath}:${empty.dir}"/>

                    <compilerarg line="${ap.processors.internal}"/>

                    <compilerarg value="-s"/>

                    <compilerarg path="@{apgeneratedsrcdir}"/>

                    <compilerarg line="${ap.proc.none.internal}"/>

                    <customize/>

                </javac>

            </sequential>

        </macrodef>

    </target>

    <target depends="-init-ap-cmdline-properties" name="-init-macrodef-javac-without-processors" unless="ap.supported.internal">

        <macrodef name="javac" uri="http://www.netbeans.org/ns/web-project/2">

            <attribute default="${src.dir}" name="srcdir"/>

            <attribute default="${build.classes.dir}" name="destdir"/>

            <attribute default="${javac.classpath}:${j2ee.platform.classpath}" name="classpath"/>

            <attribute default="${javac.processorpath}" name="processorpath"/>

            <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/>

            <attribute default="${includes}" name="includes"/>

            <attribute default="${excludes}" name="excludes"/>

            <attribute default="${javac.debug}" name="debug"/>

            <attribute default="${empty.dir}" name="gensrcdir"/>

            <element name="customize" optional="true"/>

            <sequential>

                <property location="${build.dir}/empty" name="empty.dir"/>

                <mkdir dir="${empty.dir}"/>

                <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" includeantruntime="false" includes="@{includes}" source="${javac.source}" srcdir="@{srcdir}" target="${javac.target}">

                    <src>

                        <dirset dir="@{gensrcdir}" erroronmissingdir="false">

                            <include name="*"/>

                        </dirset>

                    </src>

                    <classpath>

                        <path path="@{classpath}"/>

                    </classpath>

                    <compilerarg line="${endorsed.classpath.cmd.line.arg}"/>

                    <compilerarg line="${javac.compilerargs}"/>

                    <customize/>

                </javac>

            </sequential>

        </macrodef>

    </target>

    <target depends="-init-macrodef-javac-with-processors,-init-macrodef-javac-without-processors" name="-init-macrodef-javac">

        <macrodef name="depend" uri="http://www.netbeans.org/ns/web-project/2">

            <attribute default="${src.dir}" name="srcdir"/>

            <attribute default="${build.classes.dir}" name="destdir"/>

            <attribute default="${javac.classpath}:${j2ee.platform.classpath}" name="classpath"/>

            <sequential>

                <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}">

                    <classpath>

                        <path path="@{classpath}"/>

                    </classpath>

                </depend>

            </sequential>

        </macrodef>

        <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/web-project/2">

            <attribute default="${build.classes.dir}" name="destdir"/>

            <sequential>

                <fail unless="javac.includes">Must set javac.includes</fail>

                <pathconvert pathsep="," property="javac.includes.binary">

                    <path>

                        <filelist dir="@{destdir}" files="${javac.includes}"/>

                    </path>

                    <globmapper from="*.java" to="*.class"/>

                </pathconvert>

                <delete>

                    <files includes="${javac.includes.binary}"/>

                </delete>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-macrodef-junit">

        <macrodef name="junit" uri="http://www.netbeans.org/ns/web-project/2">

            <attribute default="${includes}" name="includes"/>

            <attribute default="${excludes}" name="excludes"/>

            <attribute default="**" name="testincludes"/>

            <sequential>

                <junit dir="${basedir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" showoutput="true" tempdir="${java.io.tmpdir}">

                    <batchtest todir="${build.test.results.dir}">

                        <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}">

                            <filename name="@{testincludes}"/>

                        </fileset>

                    </batchtest>

                    <classpath>

                        <path path="${run.test.classpath}:${j2ee.platform.classpath}:${j2ee.platform.embeddableejb.classpath}"/>

                    </classpath>

                    <syspropertyset>

                        <propertyref prefix="test-sys-prop."/>

                        <mapper from="test-sys-prop.*" to="*" type="glob"/>

                    </syspropertyset>

                    <formatter type="brief" usefile="false"/>

                    <formatter type="xml"/>

                    <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>

                    <jvmarg line="${runmain.jvmargs}"/>

                </junit>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-macrodef-java">

        <macrodef name="java" uri="http://www.netbeans.org/ns/web-project/1">

            <attribute default="${main.class}" name="classname"/>

            <attribute default="${debug.classpath}" name="classpath"/>

            <element name="customize" optional="true"/>

            <sequential>

                <java classname="@{classname}" fork="true">

                    <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>

                    <jvmarg line="${runmain.jvmargs}"/>

                    <classpath>

                        <path path="@{classpath}:${j2ee.platform.classpath}"/>

                    </classpath>

                    <syspropertyset>

                        <propertyref prefix="run-sys-prop."/>

                        <mapper from="run-sys-prop.*" to="*" type="glob"/>

                    </syspropertyset>

                    <customize/>

                </java>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-macrodef-nbjsdebug">

        <macrodef name="nbjsdebugstart" uri="http://www.netbeans.org/ns/web-project/1">

            <attribute default="${client.url}" name="webUrl"/>

            <sequential>

                <nbjsdebugstart urlPart="${client.urlPart}" webUrl="@{webUrl}"/>

            </sequential>

        </macrodef>

    </target>

    <target depends="-init-debug-args" name="-init-macrodef-nbjpda">

        <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/web-project/1">

            <attribute default="${main.class}" name="name"/>

            <attribute default="${debug.classpath}:${j2ee.platform.classpath}" name="classpath"/>

            <sequential>

                <nbjpdastart addressproperty="jpda.address" name="@{name}" transport="${debug-transport}">

                    <classpath>

                        <path path="@{classpath}"/>

                    </classpath>

                </nbjpdastart>

            </sequential>

        </macrodef>

        <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/web-project/1">

            <attribute default="${build.classes.dir}" name="dir"/>

            <sequential>

                <nbjpdareload>

                    <fileset dir="@{dir}" includes="${fix.classes}">

                        <include name="${fix.includes}*.class"/>

                    </fileset>

                </nbjpdareload>

            </sequential>

        </macrodef>

        <macrodef name="nbjpdaappreloaded" uri="http://www.netbeans.org/ns/web-project/1">

            <sequential>

                <nbjpdaappreloaded/>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-debug-args">

        <property name="version-output" value="java version &quot;${ant.java.version}"/>

        <condition property="have-jdk-older-than-1.4">

            <or>

                <contains string="${version-output}" substring="java version &quot;1.0"/>

                <contains string="${version-output}" substring="java version &quot;1.1"/>

                <contains string="${version-output}" substring="java version &quot;1.2"/>

                <contains string="${version-output}" substring="java version &quot;1.3"/>

            </or>

        </condition>

        <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none">

            <istrue value="${have-jdk-older-than-1.4}"/>

        </condition>

        <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem">

            <os family="windows"/>

        </condition>

        <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}">

            <isset property="debug.transport"/>

        </condition>

    </target>

    <target depends="-init-debug-args" name="-init-macrodef-debug">

        <macrodef name="debug" uri="http://www.netbeans.org/ns/web-project/1">

            <attribute default="${main.class}" name="classname"/>

            <attribute default="${debug.classpath}:${j2ee.platform.classpath}" name="classpath"/>

            <attribute default="${application.args.param}" name="args"/>

            <element name="customize" optional="true"/>

            <sequential>

                <java classname="@{classname}" fork="true">

                    <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>

                    <jvmarg line="${debug-args-line}"/>

                    <jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>

                    <jvmarg line="${runmain.jvmargs}"/>

                    <classpath>

                        <path path="@{classpath}"/>

                    </classpath>

                    <syspropertyset>

                        <propertyref prefix="run-sys-prop."/>

                        <mapper from="run-sys-prop.*" to="*" type="glob"/>

                    </syspropertyset>

                    <arg line="@{args}"/>

                    <customize/>

                </java>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-taskdefs">

        <fail unless="libs.CopyLibs.classpath">

The libs.CopyLibs.classpath property is not set up.

This property must point to 

org-netbeans-modules-java-j2seproject-copylibstask.jar file which is part

of NetBeans IDE installation and is usually located at 

<netbeans_installation>/java<version>/ant/extra folder.

Either open the project in the IDE and make sure CopyLibs library

exists or setup the property manually. For example like this:

 ant -Dlibs.CopyLibs.classpath=a/path/to/org-netbeans-modules-java-j2seproject-copylibstask.jar

                </fail>

        <taskdef classpath="${libs.CopyLibs.classpath}" resource="org/netbeans/modules/java/j2seproject/copylibstask/antlib.xml"/>

    </target>

    <target name="-init-ap-cmdline-properties">

        <property name="annotation.processing.enabled" value="true"/>

        <property name="annotation.processing.processors.list" value=""/>

        <property name="annotation.processing.run.all.processors" value="true"/>

        <property name="javac.processorpath" value="${javac.classpath}"/>

        <property name="javac.test.processorpath" value="${javac.test.classpath}"/>

        <condition property="ap.supported.internal" value="true">

            <not>

                <matches pattern="1\.[0-5](\..*)?" string="${javac.source}"/>

            </not>

        </condition>

    </target>

    <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-ap-cmdline-supported">

        <condition else="" property="ap.processors.internal" value="-processor ${annotation.processing.processors.list}">

            <isfalse value="${annotation.processing.run.all.processors}"/>

        </condition>

        <condition else="" property="ap.proc.none.internal" value="-proc:none">

            <isfalse value="${annotation.processing.enabled}"/>

        </condition>

    </target>

    <target depends="-init-ap-cmdline-properties,-init-ap-cmdline-supported" name="-init-ap-cmdline">

        <property name="ap.cmd.line.internal" value=""/>

    </target>

    <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-java,-init-macrodef-nbjpda,-init-macrodef-nbjsdebug,-init-macrodef-debug,-init-taskdefs,-init-ap-cmdline" name="init"/>

    <!--

                COMPILATION SECTION

            -->

    <target depends="init" if="no.dist.ear.dir" name="deps-module-jar" unless="no.deps"/>

    <target depends="init" if="dist.ear.dir" name="deps-ear-jar" unless="no.deps"/>

    <target depends="init, deps-module-jar, deps-ear-jar" name="deps-jar" unless="no.deps"/>

    <target depends="init,deps-jar" name="-pre-pre-compile">

        <mkdir dir="${build.classes.dir}"/>

    </target>

    <target name="-pre-compile">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target name="-copy-webdir">

        <copy todir="${build.web.dir}">

            <fileset dir="${web.docbase.dir}" excludes="${build.web.excludes},${excludes}" includes="${includes}"/>

        </copy>

        <copy todir="${build.web.dir}/WEB-INF">

            <fileset dir="${webinf.dir}" excludes="${build.web.excludes}"/>

        </copy>

    </target>

    <target depends="init, deps-jar, -pre-pre-compile, -pre-compile, -copy-manifest, -copy-persistence-xml, -copy-webdir, library-inclusion-in-archive,library-inclusion-in-manifest" if="have.sources" name="-do-compile">

        <webproject2:javac destdir="${build.classes.dir}" gensrcdir="${build.generated.sources.dir}"/>

        <copy todir="${build.classes.dir}">

            <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>

        </copy>

    </target>

    <target if="has.custom.manifest" name="-copy-manifest">

        <mkdir dir="${build.meta.inf.dir}"/>

        <copy todir="${build.meta.inf.dir}">

            <fileset dir="${conf.dir}" includes="MANIFEST.MF"/>

        </copy>

    </target>

    <target if="has.persistence.xml" name="-copy-persistence-xml">

        <mkdir dir="${build.web.dir}/WEB-INF/classes/META-INF"/>

        <copy todir="${build.web.dir}/WEB-INF/classes/META-INF">

            <fileset dir="${persistence.xml.dir}" includes="persistence.xml"/>

        </copy>

    </target>

    <target name="-post-compile">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/>

    <target name="-pre-compile-single">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single">

        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>

        <webproject2:javac excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}"/>

        <copy todir="${build.classes.dir}">

            <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>

        </copy>

    </target>

    <target name="-post-compile-single">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,deps-jar,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/>

    <target depends="compile" description="Test compile JSP pages to expose compilation errors." if="do.compile.jsps" name="compile-jsps">

        <mkdir dir="${build.generated.dir}/src"/>

        <java classname="org.netbeans.modules.web.project.ant.JspC" failonerror="true" fork="true">

            <arg value="-uriroot"/>

            <arg file="${basedir}/${build.web.dir}"/>

            <arg value="-d"/>

            <arg file="${basedir}/${build.generated.dir}/src"/>

            <arg value="-die1"/>

            <arg value="-compilerSourceVM ${javac.source}"/>

            <arg value="-compilerTargetVM ${javac.target}"/>

            <arg value="-javaEncoding ${source.encoding}"/>

            <classpath path="${java.home}/../lib/tools.jar:${libs.jsp-compiler.classpath}:${libs.jsp-compilation.classpath}"/>

        </java>

        <mkdir dir="${build.generated.dir}/classes"/>

        <webproject2:javac classpath="${build.classes.dir}:${libs.jsp-compilation.classpath}:${javac.classpath}:${j2ee.platform.classpath}" destdir="${build.generated.dir}/classes" srcdir="${build.generated.dir}/src"/>

    </target>

    <target depends="compile" if="jsp.includes" name="-do-compile-single-jsp">

        <fail unless="javac.jsp.includes">Must select some files in the IDE or set javac.jsp.includes</fail>

        <mkdir dir="${build.generated.dir}/src"/>

        <java classname="org.netbeans.modules.web.project.ant.JspCSingle" failonerror="true" fork="true">

            <arg value="-uriroot"/>

            <arg file="${basedir}/${build.web.dir}"/>

            <arg value="-d"/>

            <arg file="${basedir}/${build.generated.dir}/src"/>

            <arg value="-die1"/>

            <arg value="-jspc.files"/>

            <arg path="${jsp.includes}"/>

            <arg value="-compilerSourceVM ${javac.source}"/>

            <arg value="-compilerTargetVM ${javac.target}"/>

            <arg value="-javaEncoding ${source.encoding}"/>

            <classpath path="${java.home}/../lib/tools.jar:${libs.jsp-compiler.classpath}:${libs.jsp-compilation.classpath}"/>

        </java>

        <mkdir dir="${build.generated.dir}/classes"/>

        <webproject2:javac classpath="${build.classes.dir}:${libs.jsp-compilation.classpath}:${javac.classpath}:${j2ee.platform.classpath}" destdir="${build.generated.dir}/classes" srcdir="${build.generated.dir}/src">

            <customize>

                <patternset includes="${javac.jsp.includes}"/>

            </customize>

        </webproject2:javac>

    </target>

    <target name="compile-single-jsp">

        <fail unless="jsp.includes">Must select a file in the IDE or set jsp.includes</fail>

        <antcall target="-do-compile-single-jsp"/>

    </target>

    <!--

                DIST BUILDING SECTION

            -->

    <target name="-pre-dist">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,compile-jsps,-pre-dist" if="do.war.package.without.custom.manifest" name="-do-dist-without-manifest">

        <dirname file="${dist.war}" property="dist.jar.dir"/>

        <mkdir dir="${dist.jar.dir}"/>

        <jar compress="${jar.compress}" jarfile="${dist.war}">

            <fileset dir="${build.web.dir}"/>

        </jar>

    </target>

    <target depends="init,compile,compile-jsps,-pre-dist" if="do.war.package.with.custom.manifest" name="-do-dist-with-manifest">

        <dirname file="${dist.war}" property="dist.jar.dir"/>

        <mkdir dir="${dist.jar.dir}"/>

        <jar compress="${jar.compress}" jarfile="${dist.war}" manifest="${build.meta.inf.dir}/MANIFEST.MF">

            <fileset dir="${build.web.dir}"/>

        </jar>

    </target>

    <target depends="init,compile,compile-jsps,-pre-dist" if="do.tmp.war.package.without.custom.manifest" name="-do-tmp-dist-without-manifest">

        <dirname file="${dist.war}" property="dist.jar.dir"/>

        <mkdir dir="${dist.jar.dir}"/>

        <jar compress="${jar.compress}" jarfile="${dist.war}">

            <fileset dir="${build.web.dir}"/>

        </jar>

    </target>

    <target depends="init,compile,compile-jsps,-pre-dist" if="do.tmp.war.package.with.custom.manifest" name="-do-tmp-dist-with-manifest">

        <dirname file="${dist.war}" property="dist.jar.dir"/>

        <mkdir dir="${dist.jar.dir}"/>

        <jar compress="${jar.compress}" jarfile="${dist.war}" manifest="${build.meta.inf.dir}/MANIFEST.MF">

            <fileset dir="${build.web.dir}"/>

        </jar>

    </target>

    <target depends="init,compile,compile-jsps,-pre-dist,-do-dist-with-manifest,-do-dist-without-manifest" name="do-dist"/>

    <target depends="init" if="dist.ear.dir" name="library-inclusion-in-manifest">

        <copyfiles files="${libs.hibernate-support.classpath}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${libs.ejb3-persistence.classpath}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${file.reference.mysql-connector-java-5.1.6-bin.jar}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${libs.metro.classpath}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${file.reference.gson-1.3.jar}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${libs.JavaComm.classpath}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${file.reference.JPam-1.1.jar}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${file.reference.commons-configuration-1.6.jar}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${file.reference.commons-lang-2.5.jar}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${file.reference.commons-collections-3.2.1.jar}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <copyfiles files="${file.reference.gson-1.3.jar-1}" iftldtodir="${build.web.dir}/WEB-INF" todir="${dist.ear.dir}/lib"/>

        <mkdir dir="${build.web.dir}/META-INF"/>

        <manifest file="${build.web.dir}/META-INF/MANIFEST.MF" mode="update"/>

    </target>

    <target depends="init" name="library-inclusion-in-archive" unless="dist.ear.dir">

        <copyfiles files="${libs.hibernate-support.classpath}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${libs.ejb3-persistence.classpath}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${file.reference.mysql-connector-java-5.1.6-bin.jar}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${libs.metro.classpath}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${file.reference.gson-1.3.jar}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${libs.JavaComm.classpath}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${file.reference.JPam-1.1.jar}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${file.reference.commons-configuration-1.6.jar}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${file.reference.commons-lang-2.5.jar}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${file.reference.commons-collections-3.2.1.jar}" todir="${build.web.dir}/WEB-INF/lib"/>

        <copyfiles files="${file.reference.gson-1.3.jar-1}" todir="${build.web.dir}/WEB-INF/lib"/>

    </target>

    <target depends="init" if="dist.ear.dir" name="-clean-webinf-lib">

        <delete dir="${build.web.dir}/WEB-INF/lib"/>

    </target>

    <target depends="init,-clean-webinf-lib,compile,compile-jsps,-pre-dist,library-inclusion-in-manifest" if="do.tmp.war.package" name="do-ear-dist">

        <dirname file="${dist.ear.war}" property="dist.jar.dir"/>

        <mkdir dir="${dist.jar.dir}"/>

        <jar compress="${jar.compress}" jarfile="${dist.ear.war}" manifest="${build.web.dir}/META-INF/MANIFEST.MF">

            <fileset dir="${build.web.dir}"/>

        </jar>

    </target>

    <target name="-post-dist">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-dist,do-dist,-post-dist" description="Build distribution (WAR)." name="dist"/>

    <target depends="init,-clean-webinf-lib,-init-cos,compile,-pre-dist,do-ear-dist,-post-dist" description="Build distribution (WAR) to be packaged into an EAR." name="dist-ear"/>

    <!--

                EXECUTION SECTION

            -->

    <target depends="run-deploy,run-display-browser" description="Deploy to server and show in browser." name="run"/>

    <target name="-pre-run-deploy">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target name="-post-run-deploy">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target name="-pre-nbmodule-run-deploy">

        <!-- Empty placeholder for easier customization. -->

        <!-- This target can be overriden by NetBeans modules. Don't override it directly, use -pre-run-deploy task instead. -->

    </target>

    <target name="-post-nbmodule-run-deploy">

        <!-- Empty placeholder for easier customization. -->

        <!-- This target can be overriden by NetBeans modules. Don't override it directly, use -post-run-deploy task instead. -->

    </target>

    <target name="-run-deploy-am">

        <!-- Task to deploy to the Access Manager runtime. -->

    </target>

    <target depends="init,-init-cos,compile,compile-jsps,-do-compile-single-jsp,-pre-dist,-do-tmp-dist-with-manifest,-do-tmp-dist-without-manifest,-pre-run-deploy,-pre-nbmodule-run-deploy,-run-deploy-nb,-init-deploy-ant,-deploy-ant,-run-deploy-am,-post-nbmodule-run-deploy,-post-run-deploy" name="run-deploy">

        <nbjpdaappreloaded/>

    </target>

    <target if="netbeans.home" name="-run-deploy-nb">

        <nbdeploy clientUrlPart="${client.urlPart}" debugmode="false" forceRedeploy="${forceRedeploy}"/>

    </target>

    <target name="-init-deploy-ant" unless="netbeans.home">

        <property name="deploy.ant.archive" value="${dist.war}"/>

        <property name="deploy.ant.docbase.dir" value="${web.docbase.dir}"/>

        <property name="deploy.ant.resource.dir" value="${resource.dir}"/>

        <property name="deploy.ant.enabled" value="true"/>

    </target>

    <target depends="dist,-run-undeploy-nb,-init-deploy-ant,-undeploy-ant" name="run-undeploy"/>

    <target if="netbeans.home" name="-run-undeploy-nb">

        <fail message="Undeploy is not supported from within the IDE"/>

    </target>

    <target depends="init,-pre-dist,dist,-post-dist" name="verify">

        <nbverify file="${dist.war}"/>

    </target>

    <target depends="run-deploy,-init-display-browser,-display-browser-nb,-display-browser-cl" name="run-display-browser"/>

    <target if="do.display.browser" name="-init-display-browser">

        <condition property="do.display.browser.nb">

            <isset property="netbeans.home"/>

        </condition>

        <condition property="do.display.browser.cl">

            <isset property="deploy.ant.enabled"/>

        </condition>

    </target>

    <target if="do.display.browser.nb" name="-display-browser-nb">

        <nbbrowse url="${client.url}"/>

    </target>

    <target if="do.display.browser.cl" name="-get-browser" unless="browser">

        <condition property="browser" value="rundll32">

            <os family="windows"/>

        </condition>

        <condition else="" property="browser.args" value="url.dll,FileProtocolHandler">

            <os family="windows"/>

        </condition>

        <condition property="browser" value="/usr/bin/open">

            <os family="mac"/>

        </condition>

        <property environment="env"/>

        <condition property="browser" value="${env.BROWSER}">

            <isset property="env.BROWSER"/>

        </condition>

        <condition property="browser" value="/usr/bin/firefox">

            <available file="/usr/bin/firefox"/>

        </condition>

        <condition property="browser" value="/usr/local/firefox/firefox">

            <available file="/usr/local/firefox/firefox"/>

        </condition>

        <condition property="browser" value="/usr/bin/mozilla">

            <available file="/usr/bin/mozilla"/>

        </condition>

        <condition property="browser" value="/usr/local/mozilla/mozilla">

            <available file="/usr/local/mozilla/mozilla"/>

        </condition>

        <condition property="browser" value="/usr/sfw/lib/firefox/firefox">

            <available file="/usr/sfw/lib/firefox/firefox"/>

        </condition>

        <condition property="browser" value="/opt/csw/bin/firefox">

            <available file="/opt/csw/bin/firefox"/>

        </condition>

        <condition property="browser" value="/usr/sfw/lib/mozilla/mozilla">

            <available file="/usr/sfw/lib/mozilla/mozilla"/>

        </condition>

        <condition property="browser" value="/opt/csw/bin/mozilla">

            <available file="/opt/csw/bin/mozilla"/>

        </condition>

    </target>

    <target depends="-get-browser" if="do.display.browser.cl" name="-display-browser-cl">

        <fail unless="browser">

                    Browser not found, cannot launch the deployed application. Try to set the BROWSER environment variable.

                </fail>

        <property name="browse.url" value="${deploy.ant.client.url}${client.urlPart}"/>

        <echo>Launching ${browse.url}</echo>

        <exec executable="${browser}" spawn="true">

            <arg line="${browser.args} ${browse.url}"/>

        </exec>

    </target>

    <target depends="init,-init-cos,compile-single" name="run-main">

        <fail unless="run.class">Must select one file in the IDE or set run.class</fail>

        <webproject1:java classname="${run.class}"/>

    </target>

    <target depends="init,compile-test-single,-pre-test-run-single" name="run-test-with-main">

        <fail unless="run.class">Must select one file in the IDE or set run.class</fail>

        <webproject1:java classname="${run.class}" classpath="${run.test.classpath}"/>

    </target>

    <!--

                DEBUGGING SECTION

            -->

    <target depends="init,-init-cos,compile,compile-jsps,-do-compile-single-jsp,-pre-dist,-do-tmp-dist-with-manifest,-do-tmp-dist-without-manifest" description="Debug project in IDE." if="netbeans.home" name="debug">

        <nbstartserver debugmode="true"/>

        <antcall target="connect-debugger"/>

        <nbdeploy clientUrlPart="${client.urlPart}" debugmode="true" forceRedeploy="true"/>

        <antcall target="debug-display-browser"/>

        <antcall target="connect-client-debugger"/>

    </target>

    <target if="do.debug.server" name="connect-debugger" unless="is.debugged">

        <nbjpdaconnect address="${jpda.address}" host="${jpda.host}" name="${name}" transport="${jpda.transport}">

            <classpath>

                <path path="${debug.classpath}:${j2ee.platform.classpath}"/>

            </classpath>

            <sourcepath>

                <path path="${web.docbase.dir}"/>

            </sourcepath>

        </nbjpdaconnect>

    </target>

    <target if="do.display.browser.debug" name="debug-display-browser">

        <nbbrowse url="${client.url}"/>

    </target>

    <target if="do.debug.client" name="connect-client-debugger">

        <webproject1:nbjsdebugstart webUrl="${client.url}"/>

    </target>

    <target depends="init,compile-test-single" if="netbeans.home" name="-debug-start-debuggee-main-test">

        <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>

        <webproject1:debug classname="${debug.class}" classpath="${debug.test.classpath}"/>

    </target>

    <target depends="init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/>

    <target depends="init,compile,compile-jsps,-do-compile-single-jsp,debug" if="netbeans.home" name="debug-single"/>

    <target depends="init" if="netbeans.home" name="-debug-start-debugger-main-test">

        <webproject1:nbjpdastart classpath="${debug.test.classpath}" name="${debug.class}"/>

    </target>

    <target depends="init" if="netbeans.home" name="-debug-start-debugger">

        <webproject1:nbjpdastart name="${debug.class}"/>

    </target>

    <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single">

        <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>

        <webproject1:debug classname="${debug.class}"/>

    </target>

    <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single-main"/>

    <target depends="init" name="-pre-debug-fix">

        <fail unless="fix.includes">Must set fix.includes</fail>

        <property name="javac.includes" value="${fix.includes}.java"/>

    </target>

    <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix">

        <webproject1:nbjpdareload/>

    </target>

    <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/>

    <!--

                JAVADOC SECTION

            -->

    <target depends="init" if="have.sources" name="javadoc-build">

        <mkdir dir="${dist.javadoc.dir}"/>

        <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}">

            <classpath>

                <path path="${javac.classpath}:${j2ee.platform.classpath}"/>

            </classpath>

            <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}">

                <filename name="**/*.java"/>

            </fileset>

            <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false">

                <include name="**/*.java"/>

            </fileset>

        </javadoc>

    </target>

    <target depends="init,javadoc-build" if="netbeans.home" name="javadoc-browse" unless="no.javadoc.preview">

        <nbbrowse file="${dist.javadoc.dir}/index.html"/>

    </target>

    <target depends="init,javadoc-build,javadoc-browse" description="Build Javadoc." name="javadoc"/>

    <!--

                JUNIT COMPILATION SECTION

            -->

    <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test">

        <mkdir dir="${build.test.classes.dir}"/>

        <property name="j2ee.platform.embeddableejb.classpath" value=""/>

    </target>

    <target name="-pre-compile-test">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test" if="have.tests" name="-do-compile-test">

        <webproject2:javac classpath="${javac.test.classpath}:${j2ee.platform.classpath}:${j2ee.platform.embeddableejb.classpath}" debug="true" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/>

        <copy todir="${build.test.classes.dir}">

            <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>

        </copy>

    </target>

    <target name="-post-compile-test">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/>

    <target name="-pre-compile-test-single">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single">

        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>

        <webproject2:javac classpath="${javac.test.classpath}:${j2ee.platform.classpath}:${j2ee.platform.embeddableejb.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" srcdir="${test.src.dir}"/>

        <copy todir="${build.test.classes.dir}">

            <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>

        </copy>

    </target>

    <target name="-post-compile-test-single">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/>

    <!--

                JUNIT EXECUTION SECTION

            -->

    <target depends="init" if="have.tests" name="-pre-test-run">

        <mkdir dir="${build.test.results.dir}"/>

    </target>

    <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run">

        <webproject2:junit testincludes="**/*Test.java"/>

    </target>

    <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run">

        <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>

    </target>

    <target depends="init" if="have.tests" name="test-report"/>

    <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/>

    <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/>

    <target depends="init" if="have.tests" name="-pre-test-run-single">

        <mkdir dir="${build.test.results.dir}"/>

    </target>

    <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single">

        <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail>

        <webproject2:junit excludes="" includes="${test.includes}"/>

    </target>

    <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single">

        <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>

    </target>

    <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/>

    <!--

                JUNIT DEBUGGING SECTION

            -->

    <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test">

        <fail unless="test.class">Must select one file in the IDE or set test.class</fail>

        <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/>

        <delete file="${test.report.file}"/>

        <!-- must exist, otherwise the XML formatter would fail -->

        <mkdir dir="${build.test.results.dir}"/>

        <webproject1:debug args="${test.class}" classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}:${j2ee.platform.embeddableejb.classpath}">

            <customize>

                <arg value="showoutput=true"/>

                <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/>

                <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/>

            </customize>

        </webproject1:debug>

    </target>

    <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test">

        <webproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/>

    </target>

    <target depends="init,compile-test,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/>

    <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test">

        <webproject1:nbjpdareload dir="${build.test.classes.dir}"/>

    </target>

    <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/>

    <!--

                CLEANUP SECTION

            -->

    <target depends="init" if="no.dist.ear.dir" name="deps-clean" unless="no.deps"/>

    <target depends="init" name="do-clean">

        <condition property="build.dir.to.clean" value="${build.web.dir}">

            <isset property="dist.ear.dir"/>

        </condition>

        <property name="build.dir.to.clean" value="${build.web.dir}"/>

        <delete includeEmptyDirs="true" quiet="true">

            <fileset dir="${build.dir.to.clean}/WEB-INF/lib"/>

        </delete>

        <delete dir="${build.dir}"/>

        <available file="${build.dir.to.clean}/WEB-INF/lib" property="status.clean-failed" type="dir"/>

        <delete dir="${dist.dir}"/>

    </target>

    <target depends="do-clean" if="status.clean-failed" name="check-clean">

        <echo message="Warning: unable to delete some files in ${build.web.dir}/WEB-INF/lib - they are probably locked by the J2EE server. "/>

        <echo level="info" message="To delete all files undeploy the module from Server Registry in Runtime tab and then use Clean again."/>

    </target>

    <target depends="init" if="netbeans.home" name="undeploy-clean">

        <nbundeploy failOnError="false" startServer="false"/>

    </target>

    <target name="-post-clean">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,undeploy-clean,deps-clean,do-clean,check-clean,-post-clean" description="Clean build products." name="clean"/>

    <target depends="clean" description="Clean build products." name="clean-ear"/>

</project>

Manifest-Version: 1.0

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd">

<hibernate-configuration>

  <session-factory>

    <property name="hibernate.dialect">org.hibernate.dialect.MySQLDialect</property>

    <property name="hibernate.connection.driver_class">com.mysql.jdbc.Driver</property>

    <property name="hibernate.connection.url">jdbc:mysql://localhost/lidar</property>

    <property name="hibernate.connection.username">root</property>

    <property name="hibernate.connection.password">mwd40</property>

    <!-- Enable Hibernate's automatic session context management -->

    <property name="current_session_context_class">thread</property>

    <!--<mapping resource="hibernate.hbm.xml"/>-->

    <mapping class="org.lidar.db.Client"/>

    <mapping class="org.lidar.db.Log"/>

  </session-factory>

</hibernate-configuration>

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hibernate Mapping DTD 3.0//EN" "http://hibernate.sourceforge.net/hibernate-mapping-3.0.dtd">

<hibernate-mapping>

  <class name="org.lidar.db.Log" table="log">

    <id column="id" name="id">

      <generator class="increment"/>

    </id>

    <property name="date"/>

    <property name="type"/>

    <property name="message"/>

  </class>

  <!--<class name="org.lidar.db.Client" table="client">

    <id column="id" name="id">

      <generator class="increment"/>

    </id>

    <property name="key"/>

    <property name="token"/>

  </class>-->

  <class name="org.lidar.db.AuthTokens" table="authentiaction_token">

    <id column="id" name="id">

      <generator class="increment"/>

    </id>

    <property name="token"/>

    <property name="access"/>

    <property name="ip"/>

  </class>

</hibernate-mapping>

package org.lidar;

import org.hibernate.SessionFactory;

import org.hibernate.cfg.AnnotationConfiguration;

/**

 *

 * @author Andrej Cimpersek

 */

public class HibernateUtil {

  private static final SessionFactory sessionFactory;

  static {

    try {

      // Create the SessionFactory from hibernate.cfg.xml

      sessionFactory = new AnnotationConfiguration().configure().buildSessionFactory();

    } catch (Throwable ex) {

      // Make sure you log the exception, as it might be swallowed

      System.err.println("Initial SessionFactory creation failed." + ex);

      throw new ExceptionInInitializerError(ex);

    }

  }

  public static SessionFactory getSessionFactory() {

    return sessionFactory;

  }

}

package org.lidar;

import java.io.InputStream;

import java.io.OutputStream;

import javax.comm.*;

import java.util.*;

import org.apache.commons.configuration.XMLConfiguration;

import org.lidar.api.Management;

/**

 * Serial port communication

 * @author Andrej Cimpersek

 */

public class Serial {

    private boolean isOpened = false;

    private String deviceName;

    private String portName;

    private Enumeration portIdentifiers;

    private CommPortIdentifier portId;

    private SerialPort port;

    protected InputStream inputStream;

    protected OutputStream outputStream;

    private int baudRate, dataBits, stopBits, parity;

    private XMLConfiguration configuration;

    public Serial(String deviceName){

        configuration = Config.getConfiguration();

        this.portName = configuration.getString(String.format("devices.%s.port", deviceName));

        this.baudRate = configuration.getInt(String.format("devices.%s.baudRate", deviceName));

        this.dataBits = configuration.getInt(String.format("devices.%s.dataBits", deviceName));

        this.stopBits = configuration.getInt(String.format("devices.%s.stopBits", deviceName));

        this.parity = configuration.getInt(String.format("devices.%s.parity", deviceName));

    }

    /**

     * Check each port identifier if

     *   (a) it indicates a serial (not a parallel) port, and

     *   (b) matches the desired name.

     * @return boolean

     */

    protected boolean identfy(){

        this.portIdentifiers = CommPortIdentifier.getPortIdentifiers();

        this.portId = null;  // will be set if port found

        while (portIdentifiers.hasMoreElements())

        {

            CommPortIdentifier pid = (CommPortIdentifier)portIdentifiers.nextElement();

            if(pid.getPortType() == CommPortIdentifier.PORT_SERIAL && pid.getName().equals(this.portName)){

                this.portId = pid;

                return true;

            }

        }

        return false;

    }

    /**

     * Destructor - close port

     */

    @Override()

    protected void finalize() throws Throwable{

        closePort();

    }

    public boolean acquirePort(){

        if(this.portId == null) return false;

        // Use port identifier for acquiring the port

        try {

            this.port = (SerialPort)this.portId.open(

                this.deviceName, // Name of the application asking for the port

                10000   // Wait max. 10 sec. to acquire port

            );

        } catch(PortInUseException e) {

            return false;

        }

        return true;

    }

    public boolean openPort(){

        if(!acquirePort()) return false;

        closePort();

        try {

            this.port.setSerialPortParams(this.baudRate, this.dataBits, this.stopBits, this.parity);

            this.port.removeEventListener();

            this.port.addEventListener(new SerialPortEventListener() {

                public void serialEvent(SerialPortEvent event){

                    switch(event.getEventType()) {

                        case SerialPortEvent.OUTPUT_BUFFER_EMPTY:

                            onOutputBufferEmpty(event);

                            break;

                        case SerialPortEvent.DATA_AVAILABLE:

                            onDataAvailable(event);

                            break;

                    }

                }

            });